- Industrial Hygiene
- Environmental
- Analytical Laboratory
- Disc Filter Membrane
- Glass Fiber
- Silver Filter Membrane
- Ceramic Filter Membrane
- Aluminum Oxide Filter Membrane
- Mixed Cellulose Ester (MCE) Filter Membrane
- Nylon Filter Membrane
- Polytetrafluorothylene (PTFE) Filter Membrane
- Cellulose Acetate (CA) Filter Membrane
- Hydrophilic Polycarbonate (PCTE) Filter Membrane
- Hydrophobic Polycarbonate (PCTE) Filter Membranes
- PVDF Filter Membrane
- Polypropylene (PP) Filter Membrane
- Polyethersulfone (PES) Filter Membrane
- Polyacrylonitrile (PAN) Filter Membrane
- Hydrophilic, Polyester Track Etch (PETE) Filter Membrane
- Hydrophobic Polyester (PETE) Filter Membrane
- Polyether Ether Ketone (PEEK) Filter Membrane
- Regenerated Cellulose (RC) Filter Membrane
- Quantitative Filter Paper
- Qualitative Filter Paper
- Syringe Filter
- In-line Filter
- Botanical Filter Paper
- Microbiology
- Others
- Disc Filter Membrane
Inter Products Marketing Sdn Bhd
Klang, Selangor, Malaysia.
+6016-305 9138
Allin-1 5 pk Pump kit with Five Standard charger and case
| Previous | 2 / 8 | Next |
- chemical exposure monitoring
- pompa pengambil sampel udara
- NIOSH OSHA
- Intrinsically Safe
- Low Flow Air Sampler
AP Buck / APB-905050
Allin-1 5 pk Pump kit with Five Standard charger and case (Flow Rate: 5 to 600 cc/min.)
Allin-1 5 pk Pump kit c/w Allin-1 with single pack NiMH batteries (5 units), Luer hose adapter, shirt/hose clip, 3 feet of vinyl hose, non adjustable tube holder & adjustable Universal low flow holder for sorbent tube sampling, operating manuals, Five Standard charger 100-240VAC and a durable hard plastic case.
The BUCK Allin series is a personal air sampler suitable for use in location where flammable gases, vapors, dust, fibers or flyings
are present. It has steel fiber filled housing for RFI/EMI shielding, exclusive electronic circuit board for constant flow control, an LCD
display with 2 lines of 16 characters, a single diaphragm pump mechanism, and a rechargeable NiMH battery pack.
The purpose of this pump is to draw air contaminants in through a sampling media such as sorbent tubes, bubble impingers, long duration
color detector tubes; to gauge personnel exposure to gases, vapors, particulates, aerosols, etc.
No tools are required to operate this pump and a password protected keypad locking system provides uninterrupted operation. The
main display allows quick selection to RUN (for sampling) or MENU (to reset pumps data).
Features:
- UL 913 and CAN/CSA-C22.2 Intrinsically safe certified: Suitable for use in Class I, II, III, Div 1 Groups A-G, T3 Hazardous locations.
- High back pressure compensation, up to 36” of w.c.@300cc/min
- Flow compensation for filter plugging and battery voltage.
- “Auto-restart” within one minute of a flow fault.
- Includes single pack battery and run time could be extended with the use of optional triple pack.
- Battery pack rechargeable while attached or separately
- Compact, rugged, and quiet.
- Stainless steel belt clip with built-in tripod connector.
- Key pad lock system.
Technical Specifications
Flow Range: 0.1-0.6 LPM (100-600 cc/min) 5 - 99 cc/min With Universal Low Flow Holder
Compensation Range:
600 cc/min up to 10” water back pressure
500 cc/min up to 25” water back pressure
300 cc/min up to 36” water back pressure
200 cc/min up to 25” water back pressure
100 cc/min up to 10” water back pressure
Accuracy: ± 5% of Compensation Range
Run Time (hrs) at different backpressure and flow rate (cc/min)
| Backpressure (inches of water) | |||||||
| Flow Rate | 3” | 5” | 10” | 15” | 20” | 30” | 36” |
| 100 | 24hr | 23hr | 21hr | ||||
| 200 | 20hr | 19hr | 18hr | 16hr | 15hr | 14hr | |
| 300 | 19hr | 18hr | 16hr | 14hr | 13hr | 11hr | 10hr |
| 400 | 15hr | 14hr | 12hr | 11hr | 10hr | 9hr | |
| 500 | 13hr | 10hr | 9hr | 9hr | 7hr | ||
| 600 | 9hr | 8hr | 6hr | ||||
Low Flow using Universal Low Flow Holder 5 to 99cc/min 1-8 hours
| Data Storage | Flow rate, elapsed clock time, accumulated |
| Allin Plus Only | volume, temperature, DP and any Flow Faults are logged in the memory for download to PC |
| Display | Backlit LCD with 2 lines of 16 Characters |
| Normal Operation | Battery Level, Flow Rate, Elapsed Time, Volume Collected, Timer & DP. |
| Flow Fault Displays | Flow Fault, or Filter Off |
| Power Supply |
Single Pack, NiMH Batteries: 4.8V, 2.15 Ah Triple Pack, NiMH Batteries 4.8V, 6.45 Ah |
| Charger Type | Standard Wall Charger |
| Standard Charger Input Voltage | 110 VAC - 240 VAC |
| Approvals | UL913 and CAN/CSA-C22.2 Intrinsically safe certified. Suitable for use in Class I, II, III Div 1Groups A-G,T3 Hazardous locations. |
| Temperature |
Operating 32°F to 113°F (0°C to 45°C) Storage 32°F to 113°F (0°C to 45°C) Charging 50°F to 104°F (10°C to 40°C) |
| Case | Polycarbonate steel fiber filled, RFI/EMI-shielded |
| Size | 4.5”H x 4”W x 2”D (11.4 cm H x 10.2 cm W x 5 cm D) |
| Normal Operation | Battery Level, Flow Rate, Elapsed Time, Volume Collected, Timer & DP. |
| Flow Fault Displays | Flow Fault, or Filter Off |
| Power Supply |
Single Pack, NiMH Batteries: 4.8V, 2.15 Ah Triple Pack, NiMH Batteries 4.8V, 6.45 Ah |
| Charger Type | Standard Wall Charger |
| Standard Charger Input Voltage | 110 VAC - 240 VAC |
| Approvals | UL913 and CAN/CSA-C22.2 Intrinsically safe certified. Suitable for use in Class I, II, III Div 1Groups A-G,T3 Hazardous locations. |
| Temperature |
Operating 32°F to 113°F (0°C to 45°C) Storage 32°F to 113°F (0°C to 45°C) Charging 50°F to 104°F (10°C to 40°C) |
| Case | Polycarbonate steel fiber filled, RFI/EMI-shielded |
| Size | 4.5”H x 4”W x 2”D (11.4 cm H x 10.2 cm W x 5 cm D) |